poorjack
05-14-2010, 09:31 AM
Ok, I can see an annoying problem on the horizon.... crappy VO work! I don't know, but I assume the PS EYE (VO Mic for LBP2) doesn't have amazing sound quality. Low sound quality, and even high quality microphones are suseptable to hard T,S, and P sounds. They will sound like a loud pop instead of the desired sound... So I have made a simple guide for all of you who would like to nip this problem in the butt before the game even ships.
Step one- Get a wire hanger, a nylon sock, and a PS EYE. Done? Ok.
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0143501.jpg http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0156011.jpg
Step two- Unwind the wire hanger so it is a straightish piece of maluable wire. Then proceed to bend it into as close to a perfect circle as you can. Done? Good.
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0145411.jpg
Step three- Stretch the nylon sock over the circle AS TIGHT AS YOU CAN. This is what will filter out all the unwanted sharp P's, T's and S's. All stretched as the picture shows? All righty.
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0158431.jpg
Step four- Mount your PS EYE by bending the hanger around the base of the camera. the filter should be facing the mic (duh) and the mic should be positioned near the center of the filter. leave a 2 or 3 inch gap between the filter and the mic. Done? Then you are good to go son!
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0203121.jpg
IDK if you can do this in LBP 2, but the RockBand mic is superior quality to the PS EYE mic, so this filter could also attatch to the RB mic IF it's compatable. we will see when LBP2 hits shelves this fall!
Hopefully this will help with any future sound quality issues. Thanks for reading!!
Step one- Get a wire hanger, a nylon sock, and a PS EYE. Done? Ok.
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0143501.jpg http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0156011.jpg
Step two- Unwind the wire hanger so it is a straightish piece of maluable wire. Then proceed to bend it into as close to a perfect circle as you can. Done? Good.
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0145411.jpg
Step three- Stretch the nylon sock over the circle AS TIGHT AS YOU CAN. This is what will filter out all the unwanted sharp P's, T's and S's. All stretched as the picture shows? All righty.
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0158431.jpg
Step four- Mount your PS EYE by bending the hanger around the base of the camera. the filter should be facing the mic (duh) and the mic should be positioned near the center of the filter. leave a 2 or 3 inch gap between the filter and the mic. Done? Then you are good to go son!
http://i286.photobucket.com/albums/ll113/theonioncult/LBP/2010-05-14_0203121.jpg
IDK if you can do this in LBP 2, but the RockBand mic is superior quality to the PS EYE mic, so this filter could also attatch to the RB mic IF it's compatable. we will see when LBP2 hits shelves this fall!
Hopefully this will help with any future sound quality issues. Thanks for reading!!