PDA

View Full Version : Thick/Thin Logic



Bitter Sweet
10-03-2013, 06:07 PM
It would be awsome if I could program an object to be thin material sometimes and thick others! That would be benifical for my playing card games where you can't really stack cards on top of each other. So my suggestion is for a logic gate to do just that.


:)

DreadRandal
10-08-2013, 02:13 PM
Somebody told me there is a "60 thin layers" glitch. If you could get 52 of them to deplete in succession it would look like a dealing deck. I don't have LBPVita, but when I inquired about theck and thack, they said nobody has come up with vita theck or thack, which is when they mentioned the 60 thin layers. I kind of got the impression they meant 20 per thick layer. I hope that helps.

Schark94
10-08-2013, 02:25 PM
60 THIN LAYERS
by DrunkenFist_Lee

http://vita.lbp.me/v/8w6 (http://vita.lbp.me/v/8w6)-

Skalio-
10-13-2013, 10:24 PM
Or, remember that you can use the "position in layer" setting on any piece of material so that if it is dephysicalised and place in front of another piece of material in the same layer you can control which one appears on top of the other. this would allow you to make up to 41 pieces of material, so not a full deck but still quite a lot of cards, and with some camera trickery im sure you could make it look like the other 11 cards were in the same pile