Suspension bending

My suspension on my tank treds keep bending to the side whenever they get on rough terrain and they never realign themselves. I have already tried changing material and setting the springs to stiff.

(A photo) Treds before driving

( photo 1) Treds after driving

Can someone pls help?

Thanks<3

unfortunately in my experience it is very difficult to get suspension like this to work properly. i would instead suggest you use a torsion bar setup with sprung bolts (or wobble bolts set do direction and with a constant signal) to get better results.

im not saying its impossible to get the way you have it to work correctly, but it is very very hard.

here is an example, in this case the sprung bolt would be connected to the frame of the tank and the wheel would be connected to the torsion bar via the regular bolt\
[IMG]http://farm8.staticflickr.com/7154/6...713518a3b2.jpg
EXAMPLE by horwitzer, on Flickr[/IMG]

Thanks bro =D
your idea looks more stable so Ill try it out.

Think about it logically. A spring isn't designed to absorb a force across its width.

True that =)