Corner Editor question...

[BabyDoll1970•]

Does anyone know if there's a way to minimise that wretched light on the corner editor? Short of supersizing everything, I cannot see exactly where I'm editing to, especially when editing around stickers, because of that annoying red glow.
It's driving me NUTS!!! Can anyone help me, please?

[M_Logic_E]

Have you ever tried changing your popit color? Some colors are less in glow.

[Yassen]

Blue is pretty good for corner edit, Its the color i mostly use and haven't had any trouble corner editing, so it might help.
Cool colors are better than hot colors for this, so purple, blue, and so on are your best choice here.

Hope that helps!

[oLMCo]

Yeash!
I always used to have the dark purple pop it colour just because it is easier to see everything in the menus (except dark stickers I found)

They should have done something about that though, the end doesnt need to shine like that, cant see what your doind on really tight corners.

[Jaslow]

Yea, purple is best for corner editing.

I use blue though.

DON'T USE YELLOW. It's terribly bright.

[Holguin86]

Try enlarging your object. You'll be able to see what you're doing better.

[bikerider12]

It always drives me nuts too! something that i found to help is to look at the edges near the corner. if you see the meateral out of sticker, you move it in, when you see some of the sticker cut out, move it out. if you do it to both sides, it gets it close. i am just guessing that you hate making it big, or you dont have space (you can always go to another blank level and cepture it) but for now, makeing it bigger seems to help and get the job done

[Yassen]

Try enlarging your object. You'll be able to see what you're doing better.

It always drives me nuts too! something that i found to help is to look at the edges near the corner. if you see the meateral out of sticker, you move it in, when you see some of the sticker cut out, move it out. if you do it to both sides, it gets it close. i am just guessing that you hate making it big, or you dont have space (you can always go to another blank level and cepture it) but for now, makeing it bigger seems to help and get the job done

Do keep in mind that too many times that is too difficult to do or simply not possible.
As a matter of fact that's pretty much only possible with only single small objects and sticker cut-outs.

But what if the person is trying to edit the floor, the wall, or a cave?
Would you take everything apart and elarge the floor just to do that?
Or how would you enlarge the entire cave without too much trouble?

An not only then, there are way too many instances where someone cannot enlarge an object to edit it, yes it can work, no it doesn't most of the times when its really needed, except in certain occations.

[midnight_heist]

Didn't know about the colour!
Thanks.