HeEeElp!

[Gir2pr3]

i don't know how to make an AND switch, and i wanna make a level that REQUIRES the AND switch!!
HEEEEEELP!!

[Rogar]

Have a look at this: http://www.lbpcentral.com/forums/sho...ral-Logic-Pack!

Also, this is the LBP1 Tutorials section, you'd be better off asking questions in the LBP1 Help section.

[Sunbunny23]

it's real simple. i make a box, 3 blocks in the box, 2 pistons, 2 buttons,(or switches) 1 mag key sensor, and 2 mag keys. attach 1 block to a each piston. set up both buttons on back and fourth. ( or whatever it's called hadn't played lbp1 in a while ) connect 1 on each pistons.1 button effect 1 piston connected to the block. the other button does the same. make sure they both can reach the block in the middle. set up a mag key sensor on the middle block and 1 mag key on each block ( except middle of course ) now the mag key sensor/switch does all the work. just connect them to a thing like a emitter. they will do the same.

that's my version hope this works for you

tip: 1. make sure the pistons speed is very fast like 0.1.
2. if you want more then just add another block,button, mag key, and piston.