BG1, PRELOAD BG2, PRELOAD

Results 1 to 4 of 4
  1. #1

    Default How to Create a Custom Money System

    Sometimes we don't wanna use the general level points. It's nice and sometimes beneficial to make your own. Whatever the reason is, there are a couple ways to do this. A method with counters, a method with timers and percentages. The following is a method with selectors. It works pretty well and is fairly easy, rather than having to add and subtract multiple complex calculations with a timer.


    This picture shows one of the ways using selectors. It uses selectors each for ones, tens, hundreds, thousands etc. Put a 12 port selector on a microchip to start our first unit (the ones unit). We're going to use ports 3-11 for the following. Connect port 3 to a microchip with a battery at 10%, connected to a tag labeled "Ones". Connect port 4 to a microchip with a battery at 20%, connected to a tag labeled "Ones" etc. Do this up to port 11 with 90%. This will be for detecting values. Also connect port 12 to port 2 and port 1 to port 11.

    Now put a microchip below and have two OR gates connected to the directional combiner. Connect the directional combiner to the selector's toggle port. You can connect a tag sensor labeled "Ones+" to the OR gate (connected to the positive input of the directional combiner). And a tag sensor labeled "Ones-" to the other OR gate (connected to the negative input of the direction combiner).


    Now just copy this whole unit according to the amount of money values. One unit will represent Ones, the next will represent Tens, the next will represent Hundreds etc. Connect port 1 of the selector to the next unit's OR gate input, and port 12 of the selector to the other next unit's OR gate input as shown in the picture. So for example, if we have 9 and add 1, it will reset to 0 and add 10. So we would then have 10. Then vise versa for subtracting.

    All you have to do now is change the tag sensor names according to the values. So for the second unit (the tens unit), change the sensor name from "Ones" to "Tens" and "Ones+" to "Tens+" and "Ones-" to "Hundreds-". Then do the same for the third unit (the hundreds unit), change the sensor names from "Ones" to "Hundreds" and "Ones+"
    To "Hundreds+" etc.


    So now if you want to add or subtract an amount of money, connect a percentage to the corresponding tag. For example, if I wanted to add 120, I could just activate a "Hundreds+" tag. This would add the hundred. As for the the 20 we would have to add 10 twice so we'd probably have to use a sequencer to add it twice. You would activate two "tens+" tags (on the sequencer with a space in between). This would add 10 twice. That's how it would work.


    You can also detect values by using a signal strength tag sensor for the corresponding amount. So if Something required at least 500, you would use a signal strength tag sensor for "Hundreds". Connect that sensor to a positional sequencer and put a battery in the middle. So when it detects a 50% signal for the "Hundreds" tag (which would be 500), it will activate the battery on the positional sequencer. So the battery would be your output for detecting 500.

    I hope that all made sense! And I hope it helped. Let me know if you have any questions, thanks.
    Last edited by airide101; 06-07-2014 at 05:02 PM.
    Objective X (1-4 player Top Down Shooter) BETA
    https://vita.lbp.me/v/ch563


  2. #2
    LBPCentral Spotlight CrewKeyholder of Imagination L-I-M-I's Avatar
    Points: 24,213, Level: 47
    Level completed: 67%, Points required for next Level: 337
    Overall activity: 23.0%
    7 days registered 30 days registered 100 Experience Points 250 Experience Points Created Blog entry
    PSN
    L-I-M-I
    Join Date
    Sep 2011
    Location
    Chicago
    Posts
    1,190
    Blog Entries
    2

    Default

    awesome job airride

  3. Thanks!


  4. #3
    Sackperson Private koltonaugust's Avatar
    Points: 31,914, Level: 54
    Level completed: 97%, Points required for next Level: 36
    Overall activity: 28.0%
    7 days registered 100 Experience Points 250 Experience Points 500 Experience Points 30 days registered
    PSN
    Koltonaugust
    Join Date
    Jul 2010
    Location
    Texas
    Posts
    1,382
    Blog Entries
    21

    Default

    Is it just me or do the pictures only work for the post in the LBP2 thread? Great tutorial though. This way is relatively tag friendly and definitely thermo friendly. It's also the most user friendly and intuitive advanced counter I've seen.

  5. Thanks!


  6. #4

    Default

    Really awesome thread airride! I think you have to reupload the pictures tho, they aren't working anymore.
    My first level ever, teampicked!:

    RoBUST! - http://vita.lbp.me/v/dwsws

    A fun puzzle platformer with unique gameplay elements:

    That APE took the PRINCESS! - http://vita.lbp.me/v/d1eh4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •